- `make build` + `make install` now support the `STATIC=true` parameter, creating statically linked builds that are also position independent executables
- this requires CGO and a static libc on the build system
- `CGO_ENABLED=0` is set for all make build targets, unless `STATIC=true` is set
- Debug symbols are stripped (`-s -w`) for all make build targets
- Release binaries are built statically by gox (no PIE), as before.
I also took the liberty to declutter the makefile from unused & duplicated variables.
Co-authored-by: Norwin Roosen <git@nroo.de>
Co-authored-by: 6543 <6543@obermui.de>
Reviewed-on: https://gitea.com/gitea/tea/pulls/349
Reviewed-by: Andrew Thornton <art27@cantab.net>
Reviewed-by: 6543 <6543@obermui.de>
Co-authored-by: Norwin <noerw@noreply.gitea.io>
Co-committed-by: Norwin <noerw@noreply.gitea.io>
I added this check in #327, but it wasn't needed at all
as the error case it intended to catch where already handled by checking if the path exists.
fixes#378
Co-authored-by: Norwin <git@nroo.de>
Reviewed-on: https://gitea.com/gitea/tea/pulls/398
Reviewed-by: 6543 <6543@obermui.de>
Reviewed-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Norwin <noerw@noreply.gitea.io>
Co-committed-by: Norwin <noerw@noreply.gitea.io>
this is a partial fix to #378, making the command available outside of a local repo.
new behaviour:
- when run interactively without local repo context, the head repo prompt is not pre-populated
- when run with flags without local repo context, it will complain unless `--head` is specified
refactor:
- pass TeaContext down to task.CreatePull
Co-authored-by: Norwin <git@nroo.de>
Co-authored-by: 6543 <6543@obermui.de>
Reviewed-on: https://gitea.com/gitea/tea/pulls/393
Reviewed-by: Alexey 〒erentyev <axifive@noreply.gitea.io>
Reviewed-by: 6543 <6543@obermui.de>
Co-authored-by: Norwin <noerw@noreply.gitea.io>
Co-committed-by: Norwin <noerw@noreply.gitea.io>
Also consider `main` and `trunk` as options
to determine a login through its configured remote
fixes#381
Co-authored-by: Norwin <git@nroo.de>
Reviewed-on: https://gitea.com/gitea/tea/pulls/396
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-by: Alexey 〒erentyev <axifive@noreply.gitea.io>
Co-authored-by: Norwin <noerw@noreply.gitea.io>
Co-committed-by: Norwin <noerw@noreply.gitea.io>
fixes#380
note: It seems like it was expected that `SSHHost` only contains the host portion. So this may be breaking (although I don't believe many people used the feature like that with a custom ssh port). I can't think of a good reason to *not* specify the port in that field, including the port seems more intuitive
Co-authored-by: Norwin <git@nroo.de>
Reviewed-on: https://gitea.com/gitea/tea/pulls/391
Reviewed-by: Andrew Thornton <art27@cantab.net>
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Norwin <noerw@noreply.gitea.io>
Co-committed-by: Norwin <noerw@noreply.gitea.io>
- [x] enhance notification listing
- add `--states` and `--type` filters
- toggle per-user or per-repo listing via `--mine` flag
- print more fields
- [x] add subcommands to mark notifications as read, unread, pinned, unpinned. operates on
- all notifications matching the `--state` and `--mine` filter flags, or
- a notification specified by ID.
- [ ] ~~add a `--fields` flag for notifications listing.~~ *not in this PR*
- [ ] ~~interactive mode~~ *not in this PR*. this would go well together with #324fixes#243, fixes#155
based on initial work in #283 and #386, but opening a new PR for @6543 to review as I changed quite a lot
---
### ⚠️ breaking ⚠️
- `tea notifications --all` has moved to `tea notifications --mine`
- `tea notifications` now only works with the context of a remote repo.
To run this outside of a local git dir, run either `tea n --mine` or `tea n --repo <my/repo>`
---
Co-authored-by: Karl Heinz Marbaise <kama@soebes.de>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Norwin Roosen <git@nroo.de>
Reviewed-on: https://gitea.com/gitea/tea/pulls/389
Reviewed-by: 6543 <6543@obermui.de>
Reviewed-by: Alexey 〒erentyev <axifive@noreply.gitea.io>
Co-authored-by: Norwin <noerw@noreply.gitea.io>
Co-committed-by: Norwin <noerw@noreply.gitea.io>
On some OSs ([i.e. macOS](https://github.com/adrg/xdg#xdg-base-directory)), XDG directories contain spaces, so we need to wrap the resulting path used in autocomplete sourcing commands in quotation marks.
Co-authored-by: Matthew Daley <mattd@bugfuzz.com>
Reviewed-on: https://gitea.com/gitea/tea/pulls/383
Reviewed-by: Andrew Thornton <art27@cantab.net>
Reviewed-by: Norwin <noerw@noreply.gitea.io>
Co-authored-by: nukuta <nukuta@noreply.gitea.io>
Co-committed-by: nukuta <nukuta@noreply.gitea.io>
Currently, `tea` only supports the $EDITOR env var to open the user's preferred editor (used for reviewing pull requests).
Standard \*nix practice is, however, to check for $VISUAL first and only then use $EDITOR as fallback.
This is also done by Git itself, see man git-var(1).
(Actually, the order there is $GIT_EDITOR > core.editor > $VISUAL > $EDITOR > vi)
Co-authored-by: plgruener <pl.gruener@gmail.com>
Reviewed-on: https://gitea.com/gitea/tea/pulls/356
Reviewed-by: Norwin <noerw@noreply.gitea.io>
Reviewed-by: 6543 <6543@obermui.de>
Co-authored-by: plgruener <plgruener@noreply.gitea.io>
Co-committed-by: plgruener <plgruener@noreply.gitea.io>
as title, fixes#361
Handling of fish shell is different in urfave/cli; urfave/cli provides a generator for the shell script needed (probably because the fish `completion` syntax isn't flexible enough to let the application handle the completion at runtime? idk)
This means that the fish completion can become out of sync with the tea binary.
If we want to account for that, on each application run we need to
- check if `~/.config/fish/conf.d/tea_completion.fish` exists; if so
- check if the tea version that wrote it is the currently running version
- if not, rewrite the file.
Not sure this is worth the complexity & cost
It generates a completion that also suggests file names, which looks kinda messy: Didn't find a way around this, but [there may be a way](5bb54ace57/fish.go (L160-L180))
Co-authored-by: Norwin Roosen <git@nroo.de>
Co-authored-by: 6543 <6543@obermui.de>
Reviewed-on: https://gitea.com/gitea/tea/pulls/364
Reviewed-by: 6543 <6543@obermui.de>
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Norwin <noerw@noreply.gitea.io>
Co-committed-by: Norwin <noerw@noreply.gitea.io>
The `tea orgs` command is an alias to `tea orgs list`, and as such should have the same flags.
fixes#354
Co-authored-by: Norwin Roosen <git@nroo.de>
Co-authored-by: 6543 <6543@obermui.de>
Reviewed-on: https://gitea.com/gitea/tea/pulls/357
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-by: 6543 <6543@obermui.de>
Co-authored-by: Norwin <noerw@noreply.gitea.io>
Co-committed-by: Norwin <noerw@noreply.gitea.io>
as discussed with @noerw on Discord
Co-authored-by: Tamás Gérczei <tamas@gerczei.eu>
Reviewed-on: https://gitea.com/gitea/tea/pulls/350
Reviewed-by: 6543 <6543@obermui.de>
Reviewed-by: Norwin <noerw@noreply.gitea.io>
Reviewed-by: techknowlogick <techknowlogick@gitea.io>
Co-authored-by: Tamás Gérczei <tgerczei@noreply.gitea.io>
Co-committed-by: Tamás Gérczei <tgerczei@noreply.gitea.io>
..by explicitly fetching `refs/pulls/:idx/head` from the base repo.
Sorry, I mixed this with a split-up of `PullCheckout()`. I can try to separate that, if preferred
Co-authored-by: Norwin Roosen <git@nroo.de>
Co-authored-by: 6543 <6543@obermui.de>
Reviewed-on: https://gitea.com/gitea/tea/pulls/341
Reviewed-by: 6543 <6543@obermui.de>
Reviewed-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Norwin <noerw@noreply.gitea.io>
Co-committed-by: Norwin <noerw@noreply.gitea.io>
Not sure if this is the best way, but it's the simplest way to fix#333.
Everything else is overly complex due to a chicken-egg problem:
Knowing which remote / branch to push involves requires prompting the user,
which requires to have a upstream branch pushed to detect default values.
Co-authored-by: Norwin Roosen <git@nroo.de>
Reviewed-on: https://gitea.com/gitea/tea/pulls/334
Reviewed-by: 6543 <6543@obermui.de>
Reviewed-by: Andrew Thornton <art27@cantab.net>
Reviewed-by: khmarbaise <khmarbaise@noreply.gitea.io>
Co-authored-by: Norwin <noerw@noreply.gitea.io>
Co-committed-by: Norwin <noerw@noreply.gitea.io>
This enables to run commands that need minimal context (i.e. `tea n --all`) to run anywhere.
fixes#329
Co-authored-by: Norwin Roosen <git@nroo.de>
Reviewed-on: https://gitea.com/gitea/tea/pulls/336
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-by: 6543 <6543@obermui.de>
Co-authored-by: Norwin <noerw@noreply.gitea.io>
Co-committed-by: Norwin <noerw@noreply.gitea.io>
This avoids creation of local branches, to avoid cluttering the local repo:
- if the commit already exists on the tip of a local branch, check that one out
- otherwise check out the remote tracking branch (`refs/remotes/<remote>/<head>`), and suggest what to do if you want to make changes.
I'm not certain this behaviour is actually better, I suggest leaving this open for a while for people to try out the new behaviour:
```
tea pr checkout 314
make install
```
fixes#293
Co-authored-by: Norwin Roosen <git@nroo.de>
Co-authored-by: 6543 <6543@obermui.de>
Reviewed-on: https://gitea.com/gitea/tea/pulls/314
Reviewed-by: 6543 <6543@obermui.de>
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Norwin <noerw@noreply.gitea.io>
Co-committed-by: Norwin <noerw@noreply.gitea.io>
better docs
add --mine flag
hm, is there a better name? 🤔
do time filtering serverside
make printed fields dynamic
add --fields to tea times ls
code review
Co-authored-by: Norwin Roosen <git@nroo.de>
Reviewed-on: https://gitea.com/gitea/tea/pulls/319
Reviewed-by: 6543 <6543@obermui.de>
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-Authored-By: Norwin <noerw@noreply.gitea.io>
Co-Committed-By: Norwin <noerw@noreply.gitea.io>
show comments of PR
TODO: there needs to be a way to force running non-interactively
add `tea comment` to post a comment
add --comments flag, prompt only if necessary
don't prompt if --comments is provided, or output is piped
show comments for issues, add --comments flag
tea comment: print resulting comment
Merge branch 'master' into issue-172-comments
remove debug print statement
unrelated, but better than opening another PR for this ;)
Merge remote-tracking branch 'upstream/master' into issue-172-comments
ret err
fix lint
Co-authored-by: Norwin Roosen <git@nroo.de>
Co-authored-by: 6543 <6543@obermui.de>
Reviewed-on: https://gitea.com/gitea/tea/pulls/313
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-by: 6543 <6543@obermui.de>
Co-Authored-By: Norwin <noerw@noreply.gitea.io>
Co-Committed-By: Norwin <noerw@noreply.gitea.io>
add cli.AppHelpTemplate for customization
customize tea help view
tea --version : improve parseability
Rework README to include tea help output
It's an antipattern to have different help texts aimed at the same
users. So now that we have a good cli help text, lets use it here.
This eases maintenance, and at the same time gives an honest impression
on what we have to offer, while also encouraging to improve the internal
help text in the future.
I feel a bit sad for the GIF, but it was becoming outdated anyway..
group commands by category
add new demo gif
shows the (probably) most useful workflow
readme improvement
Merge branch 'master' into improve-app-help
code review
Merge branch 'master' into improve-app-help
restructure installation section
Co-authored-by: Norwin Roosen <git@nroo.de>
Reviewed-on: https://gitea.com/gitea/tea/pulls/311
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-by: khmarbaise <khmarbaise@noreply.gitea.io>
Co-Authored-By: Norwin <noerw@noreply.gitea.io>
Co-Committed-By: Norwin <noerw@noreply.gitea.io>
Implement interactive milestone creation
Return fmt.Errorf when title is empty
Incorporate deadline functionality
Use dateparse and cleanup CreateMilestone task
Signed-off-by: Martin Reboredo <yakoyoku@gmail.com>
Co-authored-by: Martin Reboredo <yakoyoku@gmail.com>
Reviewed-on: https://gitea.com/gitea/tea/pulls/310
Reviewed-by: Norwin <noerw@noreply.gitea.io>
Reviewed-by: 6543 <6543@obermui.de>
Co-Authored-By: Martin Reboredo <yakoyakoyokuyoku@noreply.gitea.io>
Co-Committed-By: Martin Reboredo <yakoyakoyokuyoku@noreply.gitea.io>
Implement pull request closing/reopening
Signed-off-by: Martin Reboredo <yakoyoku@gmail.com>
Correct year and `pull` description
Apply changes from #291
Return fmt.Errorf instead of log.Fatal if no pull index was supplied
Co-authored-by: Martin Reboredo <yakoyoku@gmail.com>
Reviewed-on: https://gitea.com/gitea/tea/pulls/304
Reviewed-by: Norwin <noerw@noreply.gitea.io>
Reviewed-by: appleboy <appleboy.tw@gmail.com>
Co-Authored-By: Martin Reboredo <yakoyakoyokuyoku@noreply.gitea.io>
Co-Committed-By: Martin Reboredo <yakoyakoyokuyoku@noreply.gitea.io>
Norwin