## Purpose
This is a refactor toward building an abstraction over managing git
repositories.
Afterwards, it does not matter anymore if they are stored on the local
disk or somewhere remote.
## What this PR changes
We used `git.OpenRepository` everywhere previously.
Now, we should split them into two distinct functions:
Firstly, there are temporary repositories which do not change:
```go
git.OpenRepository(ctx, diskPath)
```
Gitea managed repositories having a record in the database in the
`repository` table are moved into the new package `gitrepo`:
```go
gitrepo.OpenRepository(ctx, repo_model.Repo)
```
Why is `repo_model.Repository` the second parameter instead of file
path?
Because then we can easily adapt our repository storage strategy.
The repositories can be stored locally, however, they could just as well
be stored on a remote server.
## Further changes in other PRs
- A Git Command wrapper on package `gitrepo` could be created. i.e.
`NewCommand(ctx, repo_model.Repository, commands...)`. `git.RunOpts{Dir:
repo.RepoPath()}`, the directory should be empty before invoking this
method and it can be filled in the function only. #28940
- Remove the `RepoPath()`/`WikiPath()` functions to reduce the
possibility of mistakes.
---------
Co-authored-by: delvh <dev.lh@web.de>
Fixes#22236
---
Error occurring currently while trying to revert commit using read-tree
-m approach:
> 2022/12/26 16:04:43 ...rvices/pull/patch.go:240:AttemptThreeWayMerge()
[E] [63a9c61a] Unable to run read-tree -m! Error: exit status 128 -
fatal: this operation must be run in a work tree
> - fatal: this operation must be run in a work tree
We need to clone a non-bare repository for `git read-tree -m` to work.
bb371aee6e
adds support to create a non-bare cloned temporary upload repository.
After cloning a non-bare temporary upload repository, we [set default
index](https://github.com/go-gitea/gitea/blob/main/services/repository/files/cherry_pick.go#L37)
(`git read-tree HEAD`).
This operation ends up resetting the git index file (see investigation
details below), due to which, we need to call `git update-index
--refresh` afterward.
Here's the diff of the index file before and after we execute
SetDefaultIndex: https://www.diffchecker.com/hyOP3eJy/
Notice the **ctime**, **mtime** are set to 0 after SetDefaultIndex.
You can reproduce the same behavior using these steps:
```bash
$ git clone https://try.gitea.io/me-heer/test.git -s -b main
$ cd test
$ git read-tree HEAD
$ git read-tree -m 1f085d7ed8 1f085d7ed8 9933caed00
error: Entry '1' not uptodate. Cannot merge.
```
After which, we can fix like this:
```
$ git update-index --refresh
$ git read-tree -m 1f085d7ed8 1f085d7ed8 9933caed00
```
By clicking the currently active "Open" or "Closed" filter button in the
issue list, the user can toggle that filter off in order to see all
issues regardless of state. The URL "state" parameter will be set to
"all" and the "Open"/"Closed" button will not show as active.
Fixes#26548
This PR refactors the rendering of markup links. The old code uses
`strings.Replace` to change some urls while the new code uses more
context to decide which link should be generated.
The added tests should ensure the same output for the old and new
behaviour (besides the bug).
We may need to refactor the rendering a bit more to make it clear how
the different helper methods render the input string. There are lots of
options (resolve links / images / mentions / git hashes / emojis / ...)
but you don't really know what helper uses which options. For example,
we currently support images in the user description which should not be
allowed I think:
<details>
<summary>Profile</summary>
https://try.gitea.io/KN4CK3R
</details>
---------
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fixes#27114.
* In Gitea 1.12 (#9532), a "dismiss stale approvals" branch protection
setting was introduced, for ignoring stale reviews when verifying the
approval count of a pull request.
* In Gitea 1.14 (#12674), the "dismiss review" feature was added.
* This caused confusion with users (#25858), as "dismiss" now means 2
different things.
* In Gitea 1.20 (#25882), the behavior of the "dismiss stale approvals"
branch protection was modified to actually dismiss the stale review.
For some users this new behavior of dismissing the stale reviews is not
desirable.
So this PR reintroduces the old behavior as a new "ignore stale
approvals" branch protection setting.
---------
Co-authored-by: delvh <dev.lh@web.de>
Fix#28157
This PR fix the possible bugs about actions schedule.
## The Changes
- Move `UpdateRepositoryUnit` and `SetRepoDefaultBranch` from models to
service layer
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when actions unit has been disabled
or global disabled.
- Remove schedules plan from database and cancel waiting & running
schedules tasks in this repository when default branch changed.
Mainly for MySQL/MSSQL.
It is important for Gitea to use case-sensitive database charset
collation. If the database is using a case-insensitive collation, Gitea
will show startup error/warning messages, and show the errors/warnings
on the admin panel's Self-Check page.
Make `gitea doctor convert` work for MySQL to convert the collations of
database & tables & columns.
* Fix#28131
## ⚠️ BREAKING ⚠️
It is not quite breaking, but it's highly recommended to convert the
database&table&column to a consistent and case-sensitive collation.
Fix https://github.com/go-gitea/gitea/pull/28547#issuecomment-1867740842
Since https://gitea.com/xorm/xorm/pulls/2383 merged, xorm now supports
UPDATE JOIN.
To keep consistent from different databases, xorm use
`engine.Join().Update`, but the actural generated SQL are different
between different databases.
For MySQL, it's `UPDATE talbe1 JOIN table2 ON join_conditions SET xxx
Where xxx`.
For MSSQL, it's `UPDATE table1 SET xxx FROM TABLE1, TABLE2 WHERE
join_conditions`.
For SQLITE per https://www.sqlite.org/lang_update.html, sqlite support
`UPDATE table1 SET xxx FROM table2 WHERE join conditions` from
3.33.0(2020-8-14).
POSTGRES is the same as SQLITE.
This is a regression from #28220 .
`builder.Cond` will not add `` ` `` automatically but xorm method
`Get/Find` adds `` ` ``.
This PR also adds tests to prevent the method from being implemented
incorrectly. The tests are added in `integrations` to test every
database.
Introduce the new generic deletion methods
- `func DeleteByID[T any](ctx context.Context, id int64) (int64, error)`
- `func DeleteByIDs[T any](ctx context.Context, ids ...int64) error`
- `func Delete[T any](ctx context.Context, opts FindOptions) (int64,
error)`
So, we no longer need any specific deletion method and can just use
the generic ones instead.
Replacement of #28450Closes#28450
---------
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
This reverts commit b35d3fddfa.
This is totally wrong. I think `Update join` hasn't been supported well
by xorm.
I just revert the PR and will try to send another one.
Using the Go Official tool `golang.org/x/tools/cmd/deadcode@latest`
mentioned by [go blog](https://go.dev/blog/deadcode).
Just use `deadcode .` in the project root folder and it gives a list of
unused functions. Though it has some false alarms.
This PR removes dead code detected in `models/issues`.
The 4 functions are duplicated, especially as interface methods. I think
we just need to keep `MustID` the only one and remove other 3.
```
MustID(b []byte) ObjectID
MustIDFromString(s string) ObjectID
NewID(b []byte) (ObjectID, error)
NewIDFromString(s string) (ObjectID, error)
```
Introduced the new interfrace method `ComputeHash` which will replace
the interface `HasherInterface`. Now we don't need to keep two
interfaces.
Reintroduced `git.NewIDFromString` and `git.MustIDFromString`. The new
function will detect the hash length to decide which objectformat of it.
If it's 40, then it's SHA1. If it's 64, then it's SHA256. This will be
right if the commitID is a full one. So the parameter should be always a
full commit id.
@AdamMajer Please review.
- If a topic has zero repository count, it means that none of the
repositories are using that topic, that would make them 'useless' to
keep. One caveat is that if that topic is going to be used in the
future, it will be added again to the database, but simply with a new
ID.
Refs: https://codeberg.org/forgejo/forgejo/pulls/1964
Co-authored-by: Gusted <postmaster@gusted.xyz>
- Remove `ObjectFormatID`
- Remove function `ObjectFormatFromID`.
- Use `Sha1ObjectFormat` directly but not a pointer because it's an
empty struct.
- Store `ObjectFormatName` in `repository` struct
Windows-based shells will add a CRLF when piping the token into
ssh-keygen command resulting in
verification error. This resolves#21527.
---------
Co-authored-by: Heiko Besemann <heiko.besemann@qbeyond.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Refactor Hash interfaces and centralize hash function. This will allow
easier introduction of different hash function later on.
This forms the "no-op" part of the SHA256 enablement patch.
Fix#28056
This PR will check whether the repo has zero branch when pushing a
branch. If that, it means this repository hasn't been synced.
The reason caused that is after user upgrade from v1.20 -> v1.21, he
just push branches without visit the repository user interface. Because
all repositories routers will check whether a branches sync is necessary
but push has not such check.
For every repository, it has two states, synced or not synced. If there
is zero branch for a repository, then it will be assumed as non-sync
state. Otherwise, it's synced state. So if we think it's synced, we just
need to update branch/insert new branch. Otherwise do a full sync. So
that, for every push, there will be almost no extra load added. It's
high performance than yours.
For the implementation, we in fact will try to update the branch first,
if updated success with affect records > 0, then all are done. Because
that means the branch has been in the database. If no record is
affected, that means the branch does not exist in database. So there are
two possibilities. One is this is a new branch, then we just need to
insert the record. Another is the branches haven't been synced, then we
need to sync all the branches into database.
The function `GetByBean` has an obvious defect that when the fields are
empty values, it will be ignored. Then users will get a wrong result
which is possibly used to make a security problem.
To avoid the possibility, this PR removed function `GetByBean` and all
references.
And some new generic functions have been introduced to be used.
The recommand usage like below.
```go
// if query an object according id
obj, err := db.GetByID[Object](ctx, id)
// query with other conditions
obj, err := db.Get[Object](ctx, builder.Eq{"a": a, "b":b})
```
It will fix#28268 .
<img width="1313" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/cb1e07d5-7a12-4691-a054-8278ba255bfc">
<img width="1318" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/4fd60820-97f1-4c2c-a233-d3671a5039e9">
## ⚠️ BREAKING ⚠️
But need to give up some features:
<img width="1312" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/281c0d51-0e7d-473f-bbed-216e2f645610">
However, such abandonment may fix#28055 .
## Backgroud
When the user switches the dashboard context to an org, it means they
want to search issues in the repos that belong to the org. However, when
they switch to themselves, it means all repos they can access because
they may have created an issue in a public repo that they don't own.
<img width="286" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/182dcd5b-1c20-4725-93af-96e8dfae5b97">
It's a confusing design. Think about this: What does "In your
repositories" mean when the user switches to an org? Repos belong to the
user or the org?
Whatever, it has been broken by #26012 and its following PRs. After the
PR, it searches for issues in repos that the dashboard context user owns
or has been explicitly granted access to, so it causes #28268.
## How to fix it
It's not really difficult to fix it. Just extend the repo scope to
search issues when the dashboard context user is the doer. Since the
user may create issues or be mentioned in any public repo, we can just
set `AllPublic` to true, which is already supported by indexers. The DB
condition will also support it in this PR.
But the real difficulty is how to count the search results grouped by
repos. It's something like "search issues with this keyword and those
filters, and return the total number and the top results. **Then, group
all of them by repo and return the counts of each group.**"
<img width="314" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/5206eb20-f8f5-49b9-b45a-1be2fcf679f4">
Before #26012, it was being done in the DB, but it caused the results to
be incomplete (see the description of #26012).
And to keep this, #26012 implement it in an inefficient way, just count
the issues by repo one by one, so it cannot work when `AllPublic` is
true because it's almost impossible to do this for all public repos.
1bfcdeef4c/modules/indexer/issues/indexer.go (L318-L338)
## Give up unnecessary features
We may can resovle `TODO: use "group by" of the indexer engines to
implement it`, I'm sure it can be done with Elasticsearch, but IIRC,
Bleve and Meilisearch don't support "group by".
And the real question is, does it worth it? Why should we need to know
the counts grouped by repos?
Let me show you my search dashboard on gitea.com.
<img width="1304" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/2bca2d46-6c71-4de1-94cb-0c9af27c62ff">
I never think the long repo list helps anything.
And if we agree to abandon it, things will be much easier. That is this
PR.
## TODO
I know it's important to filter by repos when searching issues. However,
it shouldn't be the way we have it now. It could be implemented like
this.
<img width="1316" alt="image"
src="https://github.com/go-gitea/gitea/assets/9418365/99ee5f21-cbb5-4dfe-914d-cb796cb79fbe">
The indexers support it well now, but it requires some frontend work,
which I'm not good at. So, I think someone could help do that in another
PR and merge this one to fix the bug first.
Or please block this PR and help to complete it.
Finally, "Switch dashboard context" is also a design that needs
improvement. In my opinion, it can be accomplished by adding filtering
conditions instead of "switching".
When we pick up a job, all waiting jobs should firstly be ordered by
update time,
otherwise when there's a running job, if I rerun an older job, the older
job will run first, as it's id is smaller.
This resolves a problem I encountered while updating gitea from 1.20.4
to 1.21. For some reason (correct or otherwise) there are some values in
`repository.size` that are NULL in my gitea database which cause this
migration to fail due to the NOT NULL constraints.
Log snippet (excuse the escape characters)
```
ESC[36mgitea |ESC[0m 2023-12-04T03:52:28.573122395Z 2023/12/04 03:52:28 ...ations/migrations.go:641:Migrate() [I] Migration[263]: Add git_size and lfs_size columns to repository table
ESC[36mgitea |ESC[0m 2023-12-04T03:52:28.608705544Z 2023/12/04 03:52:28 routers/common/db.go:36:InitDBEngine() [E] ORM engine initialization attempt #3/10 failed. Error: migrate: migration[263]: Add git_size and lfs_size columns to repository table failed: NOT NULL constraint failed: repository.git_size
```
I assume this should be reasonably safe since `repository.git_size` has
a default value of 0 but I don't know if that value being 0 in the odd
situation where `repository.size == NULL` has any problematic
consequences.
Lunny Xiao
KN4CK3R
Jason Song