- Make a restriction on which issues can be shown based on if you the user or team has write permission to the repository.
- Fixes a issue whereby you wouldn't see any associated issues with a specific team on a organization if you wasn't a member(fixed by zeroing the User{ID} in the options).
- Resolves#18913
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Backport #19149
When a new branch is pushed the old SHA is always listed as the empty sha and thus the compare link that is created does not work correctly.
Therefore when creating the compare link for new branches:
1. Attempt to get the parent of the first commit and use that as the basis
for the compare link.
2. If this is not possible make a comparison to the default branch
3. Finally if that is not possible simply do not show a compare link.
However, there are multiple broken compare links remaining therefore, in order for these to not break we will simply make the compare link redirect to the default branch.
Fix#19144
Signed-off-by: a1012112796 <1012112796@qq.com>
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: a1012112796 <1012112796@qq.com>
Backport #19010
Use DeployKeyID to replace the IsDeployKey, then CanWriteCode uses the DeployKeyID to check the write permission.
Fix#19009
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Backport #19124
* Clean paths when looking in Storage
Ensure paths are clean for minio aswell as local storage.
Use url.Path not RequestURI/EscapedPath in storageHandler.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Apply suggestions from code review
Co-authored-by: Lauris BH <lauris@nix.lv>
Backport #19172
Extend issues/new/choose to pass the project id and change New Issue
link on project page to use new/choose
Fix#19170
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
- Backport #19154
- Don't panic when on `/repos/issues/search?{created,assigned,mentioned,review_requested}=true` when client didn't pass any authentication.
- Resolves#19115
Backport #19131
Backport #19142
Emails should not be sent to inactive users except for Activate and ResetPassword
messages.
Fix#18950
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #19119
If the mailer is configured then even if Manual confirm is set an activation email
is still being sent because `handleUserCreated` is not checking for this case.
Fix#17263
Signed-off-by: Andrew Thornton <art27@cantab.net>
Only pass `status_filter` on admin page
Use a more general method to pass query parameters, remove hard-coded keys
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
* Fix page and missing return on unadopted repos API
Page must be 1 if it's not specified and it should return after sending an internal server error.
* Allow ignore pages
Backport #18680
Following the merging of #17811 teams can now have differing write and readonly permissions, however the assignee list will not include teams which have mixed perms.
Further the org sidebar is no longer helpful as it can't describe these mixed permissions situations.
Fix#18572
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #18713
Move setting PullRequestWorkInProgressPrefixes to the start of PrepareViewPullInfo.
Fix#18706
Signed-off-by: Andrew Thornton <art27@cantab.net>
When migrating a repository (from GitHub) using the API (**POST** `repos/migrate`), the Code Indexer is not updated. Searching in the user interface will not return any results.
When migrating the same repository using **+/New Migration** in the web interface, the search index is updated and searching works as expected.
Caused by the fact that object `repo` is never updated with the migrated repo so `setting.Indexer.RepoIndexerEnabled && !repo.IsEmpty` in `modules/notification/indexer/indexer.go:NotifyMigrateRepository` always evaluates to `false`.
Tested with gitea:1.16.1, MariaDB:10, Breve in `Run Mode: Dev`.
Co-authored-by: Hugo Hoitink <10838836+hoitih@users.noreply.github.com>
Backport #18587
It appears that the blob-excerpt links do not work on the wiki - likely since their
introduction.
This PR adds support for the wiki on these links.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #18539
There was an unintended regression in #17917 which leads to only
repository admin commits being trusted. This PR restores the old logic.
Fix#18501
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Backport #18562
There was an unfortunate regression in #17962 where following detection of the
UserProhibitLogin error the err is cast to a pointer by mistake.
This causes a panic due to an interface error.
Fix#18561
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #18499
* Correct use `UserID` in `SearchTeams`
- Use `UserID` in the `SearchTeams` function, currently it was useless
to pass such information. Now it does a INNER statement to `team_user`
which obtains UserID -> TeamID data.
- Make OrgID optional.
- Resolves#18484
* Seperate searching specific user
* Add condition back
* Use correct struct type
Co-authored-by: Gusted <williamzijl7@hotmail.com>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Backport #18495
* Fix OAuth Source Edit Page to ensure restricted and group settings are set
* Also tolerate []interface in the groups
Fix#18432
Signed-off-by: Andrew Thornton <art27@cantab.net>
Backport #18414
The endpoint /{username}/{reponame}/milestone/{id} is not currently restricted to
the repo. This PR restricts the milestones to those within the repo.
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Fix partial cloning a repo (#18373)
- Backport from: #18373
- Backport isn't 1-1, because the frontport had a refactor in that area,
which v1.16 doesn't have.
* Include diff & use copy
* Add partial clone test
* patch
* Apply suggestions from code review
* globalArgs first
* avoid copy but make GlobalCMDArgs append first
* please linter
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: 6543 <6543@obermui.de>
* Stop trimming preceding and suffixing spaces from editor filenames
In #5702 it was decided to trim preceding and suffixed spaces aswell as / from
editing file filenames. This was because at this point in time the url-safety of
Gitea was much poorer.
We can now drop this requirement and file editing should work correctly.
Fix#18176
Signed-off-by: Andrew Thornton <art27@cantab.net>
When generating the commits list and number of files changed for PRs and
compare we should use "..." always not "..".
Fix#18303
Signed-off-by: Andrew Thornton <art27@cantab.net>
* Return nicer error if trying to pull from non-existent user
Gitea serv will currently return an 500 if we try to pull from a repository where
the owner does not exist.
This PR checks for the UserNotExist Error when checking for the user and will
return a NotFound error instead.
Fix#18225
This contains some additional fixes and small nits related to #17957
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Migrate from U2F to Webauthn
Co-authored-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: 6543 <6543@obermui.de>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
Fix#17514
Given the comments I've adjusted this somewhat. The numbers of characters detected are increased and include things like the use of U+300 to make à instead of à and non-breaking spaces.
There is a button which can be used to escape the content to show it.
Signed-off-by: Andrew Thornton <art27@cantab.net>
Co-authored-by: Gwyneth Morgan <gwymor@tilde.club>
Co-authored-by: silverwind <me@silverwind.io>
Co-authored-by: wxiaoguang <wxiaoguang@gmail.com>
6543
Lunny Xiao