Close https://gitea.com/gitea/act_runner/issues/177
Related https://gitea.com/gitea/act/pulls/56
### ⚠️ Breaking
The `container.network_mode` is a deprecated configuration item. It may be removed after Gitea 1.20 released.
Previously, if the value of `container.network_mode` is `bridge`, it means that `act_runner` will create a new network for job.But `bridge` is easily confused with the bridge network created by Docker by default.
We recommand that using `container.network` to specify the network to which containers created by `act_runner` connect.
### 🆕 container.network
The configuration file of `act_runner` add a new item of `contianer.network`.
In `config.example.yaml`:
```yaml
container:
# Specifies the network to which the container will connect.
# Could be host, bridge or the name of a custom network.
# If it's empty, act_runner will create a network automatically.
network: ""
```
As the comment in the example above says, the purpose of the `container.network` is specifying the network to which containers created by `act_runner` will connect.
`container.network` accepts the following valid values:
- `host`: All of containers (including job containers and service contianers) created by `act_runner` will be connected to the network named `host` which is created automatically by Docker. Containers will share the host’s network stack and all interfaces from the host will be available to these containers.
- `bridge`: It is similar to `host`. All of containers created by `act_runner` will be connected to the network named `bridge` which is created automatically by Docker. All containers connected to the `bridge` (Perhaps there are containers that are not created by `act_runner`) are allowed to communicate with each other, while providing isolation from containers which are not connected to that `bridge` network.
- `<custom_network>`: Please make sure that the `<custom_network>` network already exists firstly (`act_runner` does not detect whether the specified network exists currently. If not exists yet, will return error in the stage of `docker create`). All of containers created by `act_runner` will be connected to `<custom_network>`. After the job is executed, containers are removed and automatically disconnected from the `<custom_network>`.
- empty: `act_runner` will create a new network for each job container and their service containers (if defined in workflow). So each job container and their service containers share a network environment, but are isolated from others container and the Docker host. Of course, these networks created by `act_runner` will be removed at last.
### Others
- If you do not have special needs, we highly recommend that setting `container.network` to empty string (and do not use `container.network_mode` any more). Because the containers created by `act_runner` will connect to the networks that are created by itself. This point will provide better isolation.
- If you set `contianer.network` to empty string or `<custom_network>`, we can be access to service containers by `<service-id>:<port>` in the steps of job. Because we added an alias to the service container when connecting to the network.
Co-authored-by: Jason Song <i@wolfogre.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/184
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: sillyguodong <gedong_1994@163.com>
Co-committed-by: sillyguodong <gedong_1994@163.com>
Add some files that belong in every repo.
- `.editorconfig` is based on `gitea` repo.
- `.gitattributes` is useful for Windows users.
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/186
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-by: delvh <dev.lh@web.de>
Co-authored-by: silverwind <me@silverwind.io>
Co-committed-by: silverwind <me@silverwind.io>
It is just a typo fix.
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/183
Reviewed-by: techknowlogick <techknowlogick@noreply.gitea.io>
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Alex Lau (AvengerMoJo) <avengermojo@gmail.com>
Co-committed-by: Alex Lau (AvengerMoJo) <avengermojo@gmail.com>
This adds tini as a runtime init (https://github.com/krallin/tini). It improves signal handling for the container, see https://github.com/krallin/tini#why-tini.
An alternative could be to run the container with `docker run --init ...` which also places tini as a runtime init as PID 1.
Co-authored-by: sando38 <sandomir@tutanota.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/180
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: sando38 <sando38@noreply.gitea.io>
Co-committed-by: sando38 <sando38@noreply.gitea.io>
- Add `.xz` and `.xz.sha256` files to the release extra files in `.goreleaser.yaml`
upload `.xz` and `.xz.sha256` to Gitea release page.
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Co-authored-by: Jason Song <i@wolfogre.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/173
Reviewed-by: techknowlogick <techknowlogick@noreply.gitea.io>
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Co-committed-by: Bo-Yi Wu <appleboy.tw@gmail.com>
- Remove `git=2.38.5-r0` from the `apk add` command in Dockerfile
- Update the download link for act_runner in README.md to be a clickable link
Signed-off-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/172
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Co-committed-by: Bo-Yi Wu <appleboy.tw@gmail.com>
Fixes#145
At present, the working directory of a work flow is a path like `/<owner>/<repo>`, so the directory may conflict with system directory like `/usr/bin`. We need to add a parent directory for the working directory.
In this PR, the parent directory is `/workspace` by default and users could configure it by the `workdir_parent` option.
This change doesn't affect the host mode because in host mode the working directory will always be in `$HOME/.cache/act/` directory.
Co-authored-by: Jason Song <i@wolfogre.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/154
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
release-tag / goreleaser (push) Has been cancelledDetails
release-tag / release-image (push) Has been cancelledDetails
checks / check and test (push) Has been cancelledDetails
Establishes a simple framework for supporting workflow commands.
Fully implements `::add-mask::`, `::debug::`, and `::stop-commands::`.
Addresses #148
Co-authored-by: Jason Song <i@wolfogre.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/149
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Søren L. Hansen <sorenisanerd@gmail.com>
Co-committed-by: Søren L. Hansen <sorenisanerd@gmail.com>
### Add secret
```
DOCKERHUB_TOKEN=xxx
```
### Tag
when tag like `v1.0.0`, it will build multi platform docker image `gitea/act_runner:1.0.0` and `gitea/act_runner:latest`, then push to docker hub
### Use
> volume `/data` save `.runner` config file
> volume `/root/.cache` save actcache and actions cache
```sh
docker run -e GITEA_INSTANCE_URL=*** \
-e GITEA_RUNNER_REGISTRATION_TOKEN=*** \
-e GITEA_RUNNER_NAME=*** \
-v /var/run/docker.sock:/var/run/docker.sock \
-v /root/act_runner/data:/data \
-v /root/act_runner/cache:/root/.cache \
gitea/act_runner
```
Test join runners success
Test run action success
Co-authored-by: Jason Song <i@wolfogre.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/118
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: seepine <seepine@noreply.gitea.io>
Co-committed-by: seepine <seepine@noreply.gitea.io>
`docker build` may be aliased as `docker buildx build`, which doesn't support --disable-content-trust switch.
Signed-off-by: You-Sheng Yang <vicamo@gmail.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/139
Reviewed-by: techknowlogick <techknowlogick@noreply.gitea.io>
Co-authored-by: You-Sheng Yang <vicamo@gmail.com>
Co-committed-by: You-Sheng Yang <vicamo@gmail.com>
for platforms not supported by moderc.org/sqlite
Co-authored-by: Jason Song <i@wolfogre.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/137
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: techknowlogick <techknowlogick@gitea.io>
Co-committed-by: techknowlogick <techknowlogick@gitea.io>
Previously, the `Close` func returns incorrectly so that the logs may not be reported.
This PR fixes the incorrect return and sets the `StoppedAt` to get the correct task duration.
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/126
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Zettat123 <zettat123@gmail.com>
Co-committed-by: Zettat123 <zettat123@gmail.com>
GPG signature keys are not set yet.
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/116
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-committed-by: Lunny Xiao <xiaolunwen@gmail.com>
This adds a very simple Dockerfile and run script for running `act_runner` as a container.
It also allows setting `Privileged` and `ContainerOptions` flags via the new config file when spawning task containers. The combination makes it possible to use Docker-in-Docker (which requires `privileged` mode) as well as pass any other options child Docker containers may require.
For example, if Gitea is running in Docker on the same machine, for the `checkout` action to behave as expected from a task container launched by `act_runner`, it might be necessary to map the hostname via something like:
```
container:
network_mode: bridge
privileged: true
options: --add-host=my.gitea.hostname:host-gateway
```
> NOTE: Description updated to reflect latest code.
> NOTE: Description updated to reflect latest code (again).
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/84
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: Thomas E Lackey <telackey@bozemanpass.com>
Co-committed-by: Thomas E Lackey <telackey@bozemanpass.com>
add action api for artifacts upload and download.
It's related to https://github.com/go-gitea/gitea/pull/22738
Co-authored-by: Jason Song <i@wolfogre.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/103
Reviewed-by: Jason Song <i@wolfogre.com>
Co-authored-by: fuxiaohei <fuxiaohei@vip.qq.com>
Co-committed-by: fuxiaohei <fuxiaohei@vip.qq.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/105
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: Jason Song <i@wolfogre.com>
Co-committed-by: Jason Song <i@wolfogre.com>
Close#21.
Refactor environment variables to configuration file (config.yaml) and registration file (.runner).
The old environment variables are still supported, but warning logs will be printed.
Like:
```text
$ GITEA_DEBUG=true ./act_runner -c config.yaml daemon
INFO[0000] Starting runner daemon
WARN[0000] env GITEA_DEBUG has been ignored because config file is used
$ GITEA_DEBUG=true ./act_runner daemon
INFO[0000] Starting runner daemon
WARN[0000] env GITEA_DEBUG will be deprecated, please use config file instead
```
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/90
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Since the `exec` command does not use labels from `.runner`, there is no existing way to specify which Docker image to use for task execution.
This adds an `--image` flag for specifying it manually. The default remains `node:16-bullseye`.
Co-authored-by: Lunny Xiao <xiaolunwen@gmail.com>
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/83
Reviewed-by: Jason Song <i@wolfogre.com>
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
Co-authored-by: telackey <telackey@noreply.gitea.io>
Co-committed-by: telackey <telackey@noreply.gitea.io>
Fix#64 (incompletely).
It's still not ideal. It makes more sense to use the gateway IP address of container network as outbound IP of cache server. However, this requires act to cooperate, some think like:
- act creates the network for new container, and returns the network to runner.
- runner extracts the gateway IP in the network.
- runner uses the gateway IP as outbound IP, and pass it to act as cache server endpoint.
- act It continues to create the container with the created network.
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/74
Reviewed-by: Lunny Xiao <xiaolunwen@gmail.com>
The label will follow the format `label[:schema[:args]]`, and the schema will be `host` if it's omitted. So
- `ubuntu:docker://node:18`: Run jobs with label `ubuntu` via docker with image `node:18`
- `ubuntu:host`: Run jobs with label `ubuntu` on the host directly.
- `ubuntu`: Same as `ubuntu:host`.
- `ubuntu:vm:ubuntu-latest`: (Just a example, not Implemented) Run jobs with label `ubuntu` via virtual machine with iso `ubuntu-latest`.
Reviewed-on: https://gitea.com/gitea/act_runner/pulls/69
Reviewed-by: Zettat123 <zettat123@noreply.gitea.io>
Reviewed-by: wxiaoguang <wxiaoguang@noreply.gitea.io>
sillyguodong
Jason Song
Bo-Yi Wu
Lunny Xiao